2.6 Gallon Spray Unit

Description

Specs

Power type: Manual
Chemical pickup type: Draws from pre-mixed solution
Number of products unit can draw from: One product
Suction line length/diameter: 11.5 in (29.2 cm) clear poly tubing with 1/8 in (0.3 cm) inner diameter
Capacity: 2.6 gallons (10 liters)
Discharge line length/diameter: 6.5 ft. (2 m) hose, with 1/4 in. (6.4 mm) inside diameter
Discharge wand/tip type: Polypropylene trigger handle with 17 in (43.2 cm) wand extension and 80° fan tip
Output distance: 3-5 ft (0.9-1.5 m)
Output volume: 0.25 gal/min (0.95 l)
Flow rate*: 0.25 gal/min (0.95 l)
Pump seals: Viton
Fluid fittings type: All-poly
Product height: 34 inches (86.4 cm)
Run time from full tank**: Approx. 5 min

*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.

**Area covered and run time may vary based on humidity, air flow, and product used.

Requirements

Liquid temperature range: 40-100°F (4.4-37°C
Chemical compatibility: Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department